Magnetic Screw/Hardware Tray For Festool Multifunction Table MFT 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic Screw/Hardware Tray For Festool Multifunction Table MFT 3
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 48
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Magnetic Screw/Hardware Tray For Festool Multifunction Table MFT 3!
Hey all!
This is a magnetic screws/hardware tray that was designed to work with Festool Multifunction Table MFT 3 and was designed using their STEP file available on the Festool page. The magnetic screw/hardware use agents to make sure your hardware stays secure in the tray and will keep you from losing your precious screws.
The magnetic screw tray was designed to use with Festool T-Nut and will need a 1xM5 screw and 1xM5 nut.
The magnetic tray needs 25 10mmX2mm but will work without them, you'll just lose the magnetic feature.
There are 3 main versions of the Festool Hanger:
- Magnetic Tray with multicolor Festool Logo.
- Magnetic Tray with embossed Festool Logo.
- Plain Magnetic Tray with no logo.
Print Settings
- Material: PETG or above (ASA, ABS, PC) but will also work with PLA.
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Vertical Walls: 2-3
- Infill: 15%
- Supports: None
- To add Magents: add a pause in layer 25 (already added in the 3mf flies).
Hardware needed:
- 1xM5 Screw
- 1xM5 Nut
- 25x 10*2mm magnets
Please think of voting for us at the Festool Competition.
If you print one, please share your results with us! and happy printing!
