1 / 26
QUADRUPLE SPOOL HOLDER FOR ENDER 3 SERIES (PRINT-IN-PLACE) — image 1
1 / 26

QUADRUPLE SPOOL HOLDER FOR ENDER 3 SERIES (PRINT-IN-PLACE)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If you frequently switch filaments, especially mid-print (e.g., for color changes), the process of removing and…

Rating
0 / 5
Likes
0
Downloads
20
Makes
0
Views
153
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

If you frequently switch filaments, especially mid-print (e.g., for color changes), the process of removing and replacing spools can be time-consuming and frustrating. To streamline this process, you may consider using multiple spool holders (up to four) to keep your printer ready for action. This design offers a quadruple spool holder that integrates seamlessly with the original Ender 3 series top spool holder, utilizing the existing metal bracket as the primary support.

KEY FEATURES:

  • Print-in-place: No support structures required.
  • Smooth Rolling: Ensures effortless filament feeding.
  • Protective Caps: Prevent accidental spool dislodgement.
  • Original Bracket Integration: Leverages existing metal bracket mounted to the 20x20 profile on the top of your printer for easy installation.
  • Simple Assembly: Requires two 50 cent or similiar size coins as a screwdriver. Compact Design: Fits standard 220x220mm build plates (with a 45-degree angle for the extender).

Optional Filament Guide: An additional filament guide is available to direct the active filament to the extruder while securely holding the ends of unused filaments. It's recommended to pair this with a rolling filament guide mounted on the extruder side (many free designs are available on platforms like Thingiverse).

PARTS:

  • Male Spool Holder (x2): Print-in-place with rolling mechanism.
  • Female Spool Holder (x2): Print-in-place with rolling mechanism.
  • Securing Caps (x4): Protect spools from dislodgement while in use.
  • Bracket Extender (x1): Extends the original bracket to accommodate the top two spools:
    • Default Extender (S): Suitable for standard 20cm diameter spools.
    • Optional Extender (L): For larger spools up to 22cm in diameter.
  • Optional Filament Guide: Directs and secures unused filaments.

STL FILES: 

  • Required:
    • Male_Spool_Holder.stl
    • Female_Spool_Holder.stl
    • Protection_Cap.stl
    • Extender_S.stl (default for 20cm spools)
  • Optional:
    • Filament_Guide_Optional.stl
    • Extender_L_Optional.stl (for larger spools up to 22cm)
    • QSH_All_At_Once_Set.stl (to print all required parts at once on a 220x220mm build plate). Please note that it takes approximately 1 day to print this file with 20% infill.

PRINT SETTINGS:

  • All Parts:
    • Material: PLA, PETG, or ABS (PETG and ABS are recommended for long-term use) 
    • Wall Count: 2
    • Top/Bottom Layers: 4
    • Layer Height: 0.28mm for faster prints, 0.2mm for higher quality
    • Infill: 10% or more (increase infill to 60% or more for the "neck" area of the spool holders)
    • Support: None
    • Build Plate Adhesion: None
  • Bracket Extender:
    • Orientation: Place diagonally on the build plate.
    • Infill: 20% or more
    • Optional: Set Top/Bottom Line Direction to [90,180] for added strength.
  • Protection Caps:
    • Infill: 20% or more
  • Filament Guide:
    • Infill: 20% or more
    • Support: A small support is manually included for the peninsula at the plug side.

POST-PROCESSING:

  • Elephant Foot: If the outer and inner parts of the spool holders connect during print due to elephant foot problem, pull the axe upward to separate them.
  • Lubrication: Apply dry soap to the axes, moving parts, and all connection points (including twist caps, male and female screwing parts etc.) to reduce frictions.
  • Optional Filament Guide Support: Detach the small support for the peninsula at the plug side, before use.

ASSEMBLY:

  • Mount Bottom Spool Holders: Attach the male and female bottom spool holders and the extender to the original metal bracket mounted to the 20x20 profile on the top of your printer.
  • Align and Secure: Ensure the axes and holes are aligned, then twist the axes clockwise to tighten (use 50 cent coins as a screw drivers which fit to the holes at the back of each axe).
  • Install Top Spool Holders: Repeat the process for the top spool holders.
  • Load Filamant Spools and Attach Caps: Place filament spools on the holders and secure them with the protective caps by twisiting them, again clockwise to the body of the spool holders.

Happy printings :)

Botcan3D

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.28

Infill:

See summary

Category: 3D Printer Accessories

Tags