1 / 1
Reversible Double-Deck-able RepRack shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RepRack shelf with cutouts for both an "up" and "down" position.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 42
- Makes
- 1
- Views
- 428
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
RepRack shelf with cutouts for both an "up" and "down" position, with a few other changes.
- "down" position's hole placement is identical to original
- These can be dropped in next to existing repracks, and are compatible with other reprack on-shelf accessorie.
- An “up” and “down” pair can be overlapped to get two shelves out of one cleat.
- Supports up to ¾" cleats
- Brackets can be optionally bolted to each other for extra rigidity. (any mix of up-down has 3 common holes)
Hardware:
- Same ½ " EMT Conduit
- M3 nuts everywhere
- Collars use M3x8 as set screws
- Brackets can be anchored to other brackets and/or collars via ~M3x16 bolts, if using printed version.
- dxf included for sheet cut version.