ClearCom V-Box Look-Alike
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mounting box for ClearCom 4-gang size wall plates
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 39
- Makes
- 0
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an enclosure for 4-gang sized ClearCom wall plates (or similar), intended to look like the V-Box they used to offer. Personally, I like the design of the V-Box a lot more than the U-Box that replaced it.
It fits ClearCom models KP-701, KP-702, KP-702GM, KB-211, KB-212 and likely some older models or models from competing brands that use the same form factor. It features a pair of D Series knockouts on the left side.
For my purposes, I outfitted the boxes with a KP-702 and a pair of 3 pin XLR plugs (one in, one cascade), but the 3 pin could be swapped for 6 pin to take advantage of the dual channel option.
I also added a set of rubber feet that I had leftover from another product, but it looks like you can get something similar on Amazon.
I managed to print the whole thing with no supports in PLA, but your mileage may vary. Some of my overhangs weren't the prettiest, but it's all hidden once the face plate is installed.
I am also working on a clone of the ClearCom M-Box to fit the 6x8 stations, coming soon. This would include ClearCom models KB-111A, KB-112, etc.