eQ-3 eq3 thermostat to Danfoss RAV valve adapter v8
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to connect eQ-3 thermostat to Danfoss RAV (34mm) valve found in old radiators. This adapter replaces the eQ-3…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 140
- Makes
- 1
- Views
- 1,589
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v2.0
Copyright (C) 2019 Peter Senna Tschudin
SPDX-License-Identifier: GPL-2.0-only
This design is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
USE AT YOUR OWN RISK!
Adapter to connect eQ-3 thermostat to Danfoss RAV (34mm) valve found in old radiators.
This adapter replaces the eQ-3 plastic nut. To remove the plastic nut that comes with the eQ-3, use a tie wrap. The adapter uses the pipe clip from the old thermostat.
v8 improvements:
- eQ-3: tighter grip for the clip. It no longer rotates freely on the adapter.
- RAV: slic3r was ignoring the dent for the pipe clip. changed the height of the dent from 0.5 to 0.75 to solve the issue
I keep the OpenSCAD source on github.
Print Settings
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 20%
Notes: Not suitable for PLA due temperature constraints. Use PETG or other material that can handle 90C or more.