eQ-3 eq3 thermostat to Danfoss RAV valve adapter v8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to connect eQ-3 thermostat to Danfoss RAV (34mm) valve found in old radiators. This adapter replaces the eQ-3…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 1589
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v2.0
Copyright (C) 2019 Peter Senna Tschudin
SPDX-License-Identifier: GPL-2.0-only
This design is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
USE AT YOUR OWN RISK!
Adapter to connect eQ-3 thermostat to Danfoss RAV (34mm) valve found in old radiators.
This adapter replaces the eQ-3 plastic nut. To remove the plastic nut that comes with the eQ-3, use a tie wrap. The adapter uses the pipe clip from the old thermostat.
v8 improvements:
- eQ-3: tighter grip for the clip. It no longer rotates freely on the adapter.
- RAV: slic3r was ignoring the dent for the pipe clip. changed the height of the dent from 0.5 to 0.75 to solve the issue
I keep the OpenSCAD source on github.
Print Settings
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 20%
Notes: Not suitable for PLA due temperature constraints. Use PETG or other material that can handle 90C or more.