(Fixed) Mount for Fischer-style Bike rear light for rear rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimized for printing without supports, fixed dimensions and added clearance for mounting holes.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 58
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
At first I only wanted to modify it to allow support-less printing but then I found some issues with the model that kept it from being usable, I modified it some more.
This is why people should always share good quality STEP files with their models, these modifications I made were very easy and I appreciate that the STEP file was shared. I included a step file of the modified version if anyone wants to modify it further.
Also I don't know how to identify this style of bike light mount but it seems like a lot of bike lights use the same mounting system. The lights I have are not the same brand or model than the ones the original design was made for but it fits perfectly, so check your light as it might fit. The only “requirement” is the mount area has to be 16.50x16.50mm and about 2mm thick. Anything that follows these dimensions should work with this design.
For reference, I have the “KIT-R1” rear lights: Amazon link
Update: made the bridge part 1.2mm wide instead of 0.8mm to allow 4 traces. While designing a different model I found this worked more reliably.
