1 / 10
Capra Headband V3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V3 of the headband designed for various models of headphones.
- Rating
- 5 / 5
- Likes
- 205
- Downloads
- 2,296
- Makes
- 18
- Views
- 7,140
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Now much stronger and reliable with optional folding!
NOTE: if you bought the kit it does not include the parts to make the folding version! Static only!
Something to note: If you are not printing your PETG hot enough then the adjustment arms or Pivot Block may break over time with use.
Printing Instructions:
The Band and Strap are optimized for 95a shore hardness TPU
For the Strap:
The simplest explanation of the print settings is that FOR THE CENTER SECTION ONLY you need to set the top and bottom layer count to 0, set the wall count to 1, and the infill pattern to the desired mesh. Below are some pictures of these settings in various slicers.
Recommended Print orientation:
