EOD Digging Knife and Nonconductive Probe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable Digging Knife and nonconductive probe for uncovering buried items.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 186
- Makes
- 1
- Views
- 696
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Here is a simple digging knife that is pointy enough to break up dirt, but sturdy enough to not snap immediately. Great for uncovering and finding buried items of all shapes and sizes. Most of all, it looks cool.
Printing Instructions:
Material: PLA, PETG, ASA
Speed: 60-150mm/s depending on your printer's part cooling capability. If you have poor part cooling, print this model at 60 mm/s.
Part Cooling: 100% fan recommended to print the steep overhang at the knife tip
Supports: None needed if you have a printer with good cooling/bridging. Use paint on supports below the knife tip if you have issues printing this.
Bed Adhesion: Gluestick on bed recommended to prevent warping
Infill: 30% minimum
Walls: 4 minimum