1 / 1
VAOC Parts for Mandala VC4 Rear Arm (Updated Pocketed Arm) — image 1

VAOC Parts for Mandala VC4 Rear Arm (Updated Pocketed Arm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified VAOC parts for the Rat Rig V-Core 4 that are compatible with the updated Mandala Rose Works Arms.

Rating
0 / 5
Likes
10
Downloads
114
Makes
0
Views
590
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Modified VAOC parts for the Rat Rig V-Core 4 IDEX to work with the Mandala Rose Works machined arms. Two of these parts are required, the rest are optional.

NOTE: This set is for the updated version of the arm with the insulator pocket for the vertical offset switch. A separate set for unmodified arms will be provided, but I recommend you get the updated arm if you have one of the originals.

Disclaimer: At this time, I have mounted these to the arm and checked to make sure there is no electrical continuity between any of the electronics and the arm itself. I have not finished the printer yet, but I will update when I have completed the first print or when someone else reports success.

 

The Parts:

  • Required
    • vc4_vaoc_body_pocketed_arm
      • The main body. Removes an obstructing feature and bevels an edge to avoid some screws
    • vc4_vaoc_duct_pocketed_arm
      • modification to the duct part that moves the side screw holes slightly to align with the new machined arm.
  • Optional
    • vc4_vaoc_vent_easy_print (optional)
      • convenience modification to make the overhangs of this part easier to print. tweaked because my parts kit from RR had droopy overhangs and my reprints had the same
    • vc4_vaoc_midframe_extra_space (optional)
      • modification of the midframe to give a little extra space for a wire connector that is a tight fit. I didn't need this after dialing in shrinkage, but providing it for others incase they want a try
    • insulator_insert
      • This is provided by Mandala Rose Works directly. I did not design it. This printed part is included with your order of the arms. This is here just as a convenience in case you lose yours, courtesy of Mandala

Printing tips:

Get your shrinkage dialed in for ABS/ASA!! There are a lot of electronics crammed into this assembly and screw holes to line up. Your life will be much easier if you compensate well for shrinkage. I recommend the CaliCross: https://www.printables.com/model/546871-calicross-a-handy-tool-for-3d-printer-dimensional-

Tags