GPIO Hackerboard Magnetic Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic Housing for the Prusa GPIO Hackerboard
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 73
- Makes
- 3
- Views
- 679
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is magnetic housing for the Prusa GPIO Hackerboard Set.
It's modeled so the Hackerboard snaps in using the four holes at the corners. There is a hole modeled through the bottom so you can push the Hackerboard out to remove it.
I also added a recess in the model for any soldered connections if you decide to add a pin header strip to your board.
Remember to add a pause at the last layer before the magnet holes are covered so you can add the two magnets to the baseplate.
Here's a link to the magnets I used
Included an .step file. I modeled this in Rhino3D, so the .step file is an export. Please let me know if it doesn't work properly.