1 / 5
Oscilloscope probe organizer - smaller version
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An oscilloscope probe organizers for compact footprint oscilloscopes
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 78
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I like the original design, but it was too wide for my compact size oscilloscope and I had not enough desk space for it. So I came up with this version. It has a footprint of 324x200mm and is intended to be used with smaller oscilloscopes like my Siglent 1104X-E.
Printed parts
- cabinet_left
- cabinet_right
- drawer_1, 2, 3, 4
- 4x drawer_knob
Note: The drawers are not interchangeable, as the front face of each differs slightly
Other parts
- 8x Zip-ties (2.0-2.5mm)
- 4x m3 8mm screw
- 4x m3 washer (optional)
Assembly
- Combine the two ‘cabinet’ parts together using zip-ties as it is shown on the photo.
- Attach the knobs to each drawer with m3 screws and washers.
- Insert the drawers according to their part index (1-4, from left to right)
This model was designed entirely with CadQuery - a python module for building parametric 3D CAD models.