Lenco Wheel V6 printed parts

This is a set of parts you need to complete the Lenco Wheel V6 build. Please not that this was designed to work in combination with laser cut aluminum parts (instead of billet CNC to reduce cost). The front box is designed to fit a 250a Spintend VESC and a Lenco Solutions light module. It needs a aluminum plate top and bottom to dissipate heat and seal the box. The box uses 2 glands because this is a high power kit. I also included a version of the VOW battery box. I made it easier to fit a gland, sealed the hole for the sticker (this off course goes against the general advise so its your own responsibility). I also change the box to fit M2 heated inserts in the lower case. This way you can 3D print to top section instead of CNC milling it from aluminum. Please use very high quality materials like PA-CF because parts like this are very critical. The footpads are designed to also have a lower aluminum plate that's is laser cut, sold by me. I advice to print the pads from TPU. Be careful with adhesion of stuff like the sensor and grip tape. I personally think that the side covers look well in TPU but the adhesion is also a factor here even though the frame will lock the plate in place, I can deform and look weird. The others parts are dealers choice material wise IMO. One last general note, all Lenco Wheels are designed in metric dimensions and that also goes for nuts and bolts. Have fun printing this and comment if you have questions or if I missed something.