1 / 3
Hinged Lid Hex-Minimalist
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I recommend downloading the .3mf file as it already has all the settings in it, including the modifier for the logo.
Settings:
- Layer height: 0.2mm (STRUCTURAL)
- Perimeters: 8
- Top Solid layers: 0
- Bottom Solid layers: 0
- Infill: 15%
- Fill pattern: Honeycomb
- Fill angle: 30degrees
- Support material (Optional)
- Top Z contact distance: 0.1mm
- pattern: Honeycomb
- Interface pattern spacing: 0mm
- Interface loops: check
- XY separation: 50%
- Add a rectangular modifier that encompasses the logo (size and location in photo)
- add layer and perimeter to this modifier
- Bottom solid layers: 7
- Perimeters: 4
- Top Solid layers: 8
- (Optional) I did a filament color change at layer 5.00 to get the black background on the logo, then changed it back to orange at layer 5.20. I suggest doing at least two layers in black to get a deeper black color