1 / 5
Craftsman TradeStack Drawer Dividers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Craftsman TRADESTACK drawer dividers. Drawer model #CMST21404
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 198
- Makes
- 0
- Views
- 1,635
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I created some dividers to fit the Craftsman TradeStack drawers. The middle divider for the drawer is 260mm long and the two outer dividers are 250mm long.
I printed in red Hatchbox PLA as a test but they don’t holdup in the heat. Reprinted in PETG, so far so good but I wouldn’t recommend leaving the toolbox in the bed of the truck during the summer.
Because the tops are tapered on the sides I print them standing up with slim side down. I had zero issues and printed six in a row.
- 2 Vertical walls
- 10%infill (I think)
- Enable brim