DDR Arcade - Coin Mech Delete and Replacement Hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I recently purchased a DDR arcade machine that was converted for Stepmania. It was missing some of the coin…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 445
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
I recently purchased a DDR arcade machine that was converted for Stepmania. It was missing some of the coin mechanisms, so I decided to design some covers. It was also missing the wiring hose that connect the pads to the cabinet, so I designed some couplers that allow a spare vacuum hose to be used (scored mine for $1.99 at a thrift store). The hose is friction fit and holds surprisingly good. Additionally, missing the coin mechanism meant my control panel was dangling lose, so designed a bracket to hold it. I made a knob for one of the coin doors so I could still access the control panel. I hot glued some magnets in to hold the door shut. To install the covers and knob, I held them in place by hand and then heated/smushed the edge of the covers to hold them in place.
Category: Video Games