1 / 4
Storage Rack for Powertec Pec- Fly Attachment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Unistruts and printed parts to store the Powertec Fly attachment
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
The Powertec-Fly attachment can be tricky to store. I made this storage rack from a leftover superstrut (Unistrut). It's still a work in progress, but it's fully functional. I used a 19 mm box offset wrench to tighten the bolt inside the receiver. Estimated cost: ~$60.
If there is sufficient demand, I can design a receiver for a two-by-four stud, which would be significantly more economical.
Printed on a Sovol + with a 0.8 nozzle, this took 2 hours print with an adjustable height and 80% infill. PLA+.
Parts list: