Qidi Plus 4 Spool holder 3kg
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool holder for 3Kg rolls that fit on OEM bracket with extra attachment option
- Rating
- 4.25 / 5
- Likes
- 51
- Downloads
- 305
- Makes
- 4
- Views
- 2,406
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
***REVISED***
I had uploaded the wrong front-screw model … added proper one and also a small washer to retain the baril in place with the bearings when changing spools :)
Spool support with a cylinder on needle bearings to minimize friction because of the weight.
The wheel nut with front bracket is a print in place
Simply remove OEM support and install new one
I added a front support for non-raiser printer (i will upload my raiser model soon)
*** PRINT SETTINGS: ***
Layer : 0.2
Infill: 20% Tri-Hexagone recommend
4 top & bottom layers
Support only for small overhang on back support
In “OBJECTS MODE”, change needle bearings assy layers to 0.8
Use SCARF JOINT SEAM on cylinder for a better finish
Recommend ABS or PETG-CF ***No PLA***
Replace screw on back cover with M3x12 to screw lower back support in place
***NOTE***
Parts will not load flat on bed, align as in the pic …. full plate 13h print ;)
I will add different shafts that screws on back support for different size soon :)