Mirror Insert Brackets | IKEA KALLAX & EXPEDIT | BLODLÖNN
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.81 – €2.22 net (excluding VAT)
For file: Ikea-glass-insert-4x-mixed_0.6n_0.2mm_PLA_MK4IS_1h27m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.01 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 1.45 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Brackets to place ikea blodlönn or other 300x300x20mm mirrors into Kallax and Expedit shelf compartments
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 0
- Views
- 622
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Insert mirrors into your kallax or expedit shelves using these brackets.
4 different spacings of the bracket are available. 0.1, 0.2, 0.3 and 0.4mm
With perfect print tolerances and perfectly leveled shelve, you can use four of the 0.2mm brackets.
In case your shelve is slightly off level, use the larger spaced brackets to work around too tight fit.
Assembly:
Attach four brackets to the mirror. They should friction fit to 2mm thick mirrors
Carefully insert the assembly into a shelf. Move the mirror by moving the brackets to avoid finger prints.
In case the shelf is too tight for the 0.2mm brackets, use 0.3 or 0.4mm brackets in the corners that are not fitting.