1 / 2
Weihnachtskugel 002 Ornament 80x80 mm  ++ no AMS needed — image 1
1 / 2

Weihnachtskugel 002 Ornament 80x80 mm ++ no AMS needed

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Weihnachtskugel 002 Ornament 80x80 mm

Rating
0 / 5
Likes
18
Downloads
87
Makes
0
Views
593
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Wenn euch meine Arbeit gefällt, würde ich mich über euren Support freuen, damit alle Inhalte kostenfrei bleiben.

Buy me a Coffee …
Ko-Fi … https://ko-fi.com/lagnor69
Pay Pal … https://www.paypal.com/donate/?hosted_button_id=7XBNU8XD2XFAE

--------------------------------------------------------------------------------------------------------------

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 80x80mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA GEEETECH Water Blue Transmission Distance: 5
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Water Blue
At layer #16 (1.36mm) swap to Grey
At layer #17 (1.44mm) swap to White for the rest.

Tags