Karaoke Microphone Stand from broomstick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upcycle a standard broom handle into a fully functional telescopic microphone stand
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 8
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Upcycle a broom stick into a telescopic microphone stand
Standard telescopic broom handle with 24mm thread
Base with 27.2mm hole for 27mm interference fit with broom handle
(Remove the hook if present)
Render
Printing
Microphone Clip and Broom Screw Cap Adaptor
Printed in two pieces and assembled with M3x10 screw
The screw provides additional structural support for the heavy Mic.
STL models offered with and without M3 Insert
Weighted Stand
The Stand Prints upside down without supports.
I used a 0.8mm nozzle to speed up print time with 0.4mm layer height.
Add plenty of Top Layers to increase weight & reduce center of mass.
I aimed for Total weight of 400g and works well - especially at kids height.
