1 / 4
Infinity Cube - Tolerance Test
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Test Models
- License
- Standard Digital File License
Introducing the V4 Infinity-Cube Tolerance Tests (0.4mm test vor V3.x)
These test prints are designed to ensure your printer can handle the latest hinge designs for the Infinity-Cube V4 without resulting in overly loose joints. Each test piece is marked with numbers (2–4) corresponding to the 0.2–0.4 mm gap variations available.
Before You Begin
- Check Your Supports:
If you aren’t using the provided .3mf files, make sure to apply supports only to the longer, free-hanging lever. This lever is intentionally designed to provide extra leverage, allowing you to carefully loosen the hinge after printing. - Dialing In Your Settings:
If the hinges feel too stiff, consider the following adjustments:- Print Cooler: Lowering the nozzle temperature can improve accuracy and reduce unwanted stringing.
- Print Slower: A slower print speed often results in better dimensional accuracy and tighter tolerances.
- Maximize Part Cooling: Ensure your part-cooling fan is operating at its best setting for sharper edges and improved hinge tolerance.
- Adjust Retraction (If Needed): Only necessary if you’re experiencing stringing; otherwise, it’s less critical.
By making these fine-tuned adjustments, you’ll likely achieve the perfect balance between hinge movement and stability—ensuring your Infinity-Cube V4 works smoothly right from the start.