Lenovo Thinkpad e14 (gen2) height-adjusting front foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A front foot replacement for Lenovo ThinkPad e14 (g2) that makes the laptop level when placed on a flat surface
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I need to stack some laptop chassis - and with the original feet, they tend to slant a bit to the front side.
Since over the back feet the laptops are 17.75mm high, and over the front feet it's 14.5mm, I adjusted the height of the provided model by a bit to level them out.
Printed mine in TPU 95a to closely match the original feet, but PLA should also work fine.
Affixed them to the bottom shell with superglue.
For a non-permanent solution you may also use thin double-sided tape (which is what Lenovo's using from the factory).