Stone Dragon / Stein Drache
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.86 – €2.27 net (excluding VAT)
For file: StoneDragon-Stand-50%_0.4n_0.2mm_PLA_MK4IS_1h14m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.06 excluding VAT (range midpoint).
- Weight reported by the author
- 43 g
- Print time reported by the author
- 1.24 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
model of the skull of a StoneDragon Modell des Schädels eines Steindrachen
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 238
- Makes
- 1
- Views
- 1,124
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Model of a Dragon Skull with Stand (StoneDragon)
Printed on Prusa MK04 and Bambu PS1
Scalable: yes (I uploaded 2 sliced example Files (50 and 75 %)
Support: Yes, organic / only on plate
Printed in PLA matte red and black
!!Take your time and proceed carefully when removing the supports, as the spikes might break off, especially if the skull is scaled down significantly.
Series: DragonRelicCollection Model: StoneDragon (more to come)
StoneDragon
The Stone Dragon, also known as the "Mountain Guardian," was a true giant of the mountains. Its massive bone structure and horn-like protrusions helped it fend off predators and rivals. It was a master of camouflage in rocky landscapes, where it would ambush its prey.
Modell eines Drachenschädels mit Standfuss (SteinDrache)
gedruckt auf Prusa MK04 und Bambu PS1
scaleable: ja (ich habe 2 fertig geslicte Beispiele hochgeladen ( 50 und 75 %)
Support: ja organic / only on Plate
gedruckt in PLA matte red and black
!!Beim Entfernen der Supports ein bisschen Zeit nehmen und vorsichtig vorgehen sonst brechen die Stacheln ab, gerade wenn man den Schädel sehr viel kleiner scaled.
Serie: DragonRelicCollection Modell: StoneDragon
Steindrache
Der Steindrache, auch als „Gebirgswächter“ bekannt, war ein wahrer Gigant der Berge. Seine massive Knochenstruktur und seine hornartigen Auswüchse halfen ihm, Raubtiere und Rivalen abzuwehren. Er war ein Meister darin, sich in felsigen Landschaften zu tarnen und dort seine Beute zu überraschen.