Multi Bowl Water Fountain Electronics Housing V2
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.04 – €8.60 net (excluding VAT)
For file: Housing_0.3mm_PLA_MK3S_5h33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.82 excluding VAT (range midpoint).
- Weight reported by the author
- 145 g
- Print time reported by the author
- 5.56 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
V2 of the electronics housing for the Multi Bowl Water Fountain. Featuring a 9V battery and better seals.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
Multi Bowl Water Fountain Electronics House
The Multi Bowl Water Feature shown here was not designed to hold any electronics. This was due to the design being primarily focused on being was waterproof as possible. To solve this problem, this base clips onto the bottom of the stem and houses a 9V battery alongside an LM2596 module for controlling the speed of the pump. There is also another connector for a solar panel connection.
Electronics
The electronics for this are incredibly simple, an adjustable LM2596 Buck converter is used to control the motor speed. The switch allows the user to turn on and off the pump. The electronics are wired such that either the LM2596 or the battery is powering the device through the use of a diode. The wiring is shown in the diagram below:

Equipment List:
- Dupont Crimps
- YIXISI Connectors
- 1 x LM2596 ADj breakout Board
- 9V USB C Battery
- Solar Panel Array [Printables]
Technical Drawing
