Lighter Butane Nozzle Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to use a butane can to refill lighters.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 390
- Makes
- 0
- Views
- 812
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lighters don't have a refill valve that is the right size. This is really annoying because then you need an adapter to fill your lighter. I tried out a bunch of different ones out there and I found that most of them did not work. So I did the only logical thing a person with a 3d printer would and I made my own.
This was a really easy print, just make sure you use mouse ear brim so that it adheres to the build plate but the brim comes off nice. Also I recommend finer layers so that the butane has a harder time going through the gaps between the layers. The butane is really cold when it comes out and it hurts to get it on your hands.
Version 2.0 is out! Here is a link:
https://makerworld.com/en/models/1646987-butane-lighter-refill-adapter-2-0#profileId-1740748