1 / 5
Digital belt tension meter modification to use steel spring
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I liked the original idea, however there are few design details i didnt like that much, so here is my mod.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 104
- Makes
- 0
- Views
- 870
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print without supports, see pictures for proper orientation. Main holder and endcap should be tight fit - depends on how dialed your printer is. You might need to recalibrate hole in the tip.
Spring i used is ca 28mm overall length, coil length 13,5mm, 21 coils, outer diameter 8,2mm, wire dia 0,65mm. But anything similar can do.
Depth gauge is Ultimate speed from Lidl. I guess anything that look alike will fit.
Use two 5mm dia, 18mm long steel pins and M3x12-16 FHCS screw to complete.