NUC7i5-7BNH Bottom Cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.72 – €3.33 net (excluding VAT)
For file: NUC7i5-7BNH-Bottom_Cover v2_0.2mm_PLA_MK3S_2h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.02 excluding VAT (range midpoint).
- Weight reported by the author
- 49 g
- Print time reported by the author
- 2.49 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
NUC7i5-7BNH Bottom Cover. The bottom plate normally has serial sticker and Intel does not offer replacements.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 35
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
NUC7i5-7BNH Bottom Cover. In case, like me, you have any of these units without the bottom.
The screws that connect the cover to the rest of the case are also not offered in replacement, so instead I opted to replace them with simple M2.5countersunk machine screws and standoffs that I already had lying around.
This also has reinforcements on center line and is designed for heat-set inserts to be compatible with appropriate mounting kits / adapters. Since the original cover is sheet steel and these mount points might have significant load, I suggest adding a wide-head, short depth screw on the back to help prevent tear-out. I went with some nylon ones that since they aren't conductive and my use case had very little force involved.
Modify to your hearts content. Hopefully saves at least one poor soul some time. :)