NUC7i5-7BNH Bottom Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NUC7i5-7BNH Bottom Cover. The bottom plate normally has serial sticker and Intel does not offer replacements.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
NUC7i5-7BNH Bottom Cover. In case, like me, you have any of these units without the bottom.
The screws that connect the cover to the rest of the case are also not offered in replacement, so instead I opted to replace them with simple M2.5countersunk machine screws and standoffs that I already had lying around.
This also has reinforcements on center line and is designed for heat-set inserts to be compatible with appropriate mounting kits / adapters. Since the original cover is sheet steel and these mount points might have significant load, I suggest adding a wide-head, short depth screw on the back to help prevent tear-out. I went with some nylon ones that since they aren't conductive and my use case had very little force involved.
Modify to your hearts content. Hopefully saves at least one poor soul some time. :)