T-nut drop-in for Festool workbench MFT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drop-in T-nut for attaching accessories to the Festool workbench MFT. The T-nut can be selected for M3 - M6 screws.
- Rating
- 5 / 5
- Likes
- 452
- Downloads
- 1,282
- Makes
- 1
- Views
- 7,571
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Use the drop-in T-nuts to mount different accessories to the Festool workbench MFT. The accessory will be firmly attached to the workbench.
I made two different versions of the T-nuts, one threaded for M3 to M6 and the other for a nut or hex screw for M3 to M5.
Printing and print settings
In the model files, the parts are orientated in the direction best suited for printing. Use e.g. PLA and a nozzle width of 0.4 mm or less and an infill of 100 % to make it solid. For the threaded T-nuts you will need to print with a layer height of 0.12mm in order for the threads to be usable. My recommendation is a brim, as the footprint is small. No support structure are required for the printing. There is no need for post-print finishing and the screws are easy to screw in.