Antec Three Hundred Two (302) 3.5" HDD Rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement rail for the Antec Three Hundred Two hard drive rail that came with the case.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 319
- Makes
- 0
- Views
- 1,646
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Antec Case Rail
Replacement rails for an Antec case.
I was repurposing one of my computers to be an Unraid (https://unraid.net/) server, and while moving things around, I broke one of the rails that hold in the hard drives.
I looked at other rail designs, but couldn't find one I liked.
Beyond simply fitting the case, I wanted it to not take screws.
I could not find an existing rail that did both, so I created this rail.
Set the number of vertical perimeters so that the pin is solid plastic.
In my case, this meant increasing the value from 2 to 3 to get a solid pin.
As noted by CircuitGuy in the comments, do use supports when printing.
- Code: https://github.com/AnthonyZ71/antec_case_rail
- STLs: https://www.prusaprinters.org/prints/112341-antec-three-hundred-two-302-35-hdd-rail
References
This OpenSCAD file makes use of the dotSCAD library (https://github.com/JustinSDK/dotSCAD) and assumes it is installed in the system properly.