Ghost Trap bars for the new Two In The Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ghost trap bars on your new TITB ghost trap. There are two versions here, GB1 and GB2
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
Replace the standard red or silver trap bars in your new Two In The Box ghost trap.
There are two versions of the file, one for GB1 (with the notch) and one for GB2 (no notch), these simply clip in.
Some caveats to using these:
- Only print vertically, the strength of the print in the connectors will not be strong enough if printed horizontally, they could snap off in your trap (ask me how I know..)
- Modifying your trap is at your own risk, there's not much much to risk here, other than the legs snapping off, which when I managed that (printing horizontally) I got them out with hot glue.
- Best printed in metallic colours, the print lines then give that “machined” look
- You may need to file down a tiny amount where the supports touch the legs, as the tolerances are fairly small for them to fit into the trap.
Enjoy!