1 / 2
Overengineered RSA Token Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for standard ID Card holders, fits the current standard RSA Token only
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 51
- Makes
- 0
- Views
- 396
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Reasonably fast print. I used a 0.4mm nozzle and 1.75mm PLA filament for a length of around 3.5m. Overhangs on the sides are 40 degrees, card is 0.9mm thickness, most external radii are 2mm. Radii on the inside are designed to grip the token but it's not a struggle to get in/out.