Celestron 130EQ Dew and stray light shield
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular dew shield for Astromaster 130EQ
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
A modular, printable dew shield for Celestron Astromaster 130EQ Newtonian.
Includes a cover with four holes for solar filters, bathinov mask, dew shield TUBE and the dew shield base.
Screw list:
4x M8 screw
4x M8 nuts
Attaching the base is a bit tricky, you need to put the base in, mark the position of screws that are already in the telescope, then drill holes in the marked places and then screw the nuts on while the base is on. The filter holders are glued from the bottom of the cover with superglue or hot glue.
It is best to print in a dark shade of filament for internal reflection minimalization.
For the entire shield, you need to print:
1x TUBE
1x Base
1x Bathinov mask
1x Cover
2x Filter holder
2x Filter cover
Message me for further guidance if required