Inventables Makita CNC Dust Boot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dust boot I created for my Inventables Makita CNC X-Carve.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 400
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a dust boot I created for my Inventables Makita CNC X-Carve. This model contains a main boot to stay mounted onto the router clamp, a dust guard to fully cover the milling area and provide better suction, and 2x screws to mount the two together. I printed the main boot with 20% infill on PLA, the Guard with 60% infill with PLA, and printed 2x screws with 80% infill with PETG. Hole size was designed to fit a standard vacuum hose. Lastly, I grabbed a spare broom and removed the bristles so I could hot glue them onto the boot. Cut to preferred height. Feel free to reach out if you have any thoughts or recommendations!