Print Files for ZionMRS Paladin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed models for the ZionMRS Paladin (DCL Practice frame).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Each model has the material in it and a descriptive name in the file name, and if more than one is printed, it is at the end of the name. If a file has two materials in the name, the first one is what I would use, the second is another that likely could work, but maybe not as well/hasn't been tested.
The pod will absolutely need supports, and I typically print it with the front mounting holes and rear arc touching the build plate (use the place flat function on the face generated there). The others should be printable without supports, but add them if you see fit. I recommend 100% infill for all but the battery pad, which I recommend 1 wall and 15% gyroidal infill.