1 / 3
Card Game Storage Card Stabilizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I built this for my MTG bulk storage to keep the cards upright when I don't have enough to fill a row.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 46
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Make sure your card storage system can accept 100 mm tall cards. Otherwise you will either need to sand a few mm off or cut some off the top/bottom to make it fit. Has a range of 70-140 mm. Printed with the flat part on the build plate with no supports on a Qidi Q1 pro. You do have to slowly work the threads back and forth all the way down the first time you screw them together but then they screw in and out smoothly.