RatRig V-Core 4 6mm PTFE Mod Reverse Bowden
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6mm PTFE Mod for the lower part of the reverse bowden. Reduces drag in the filament path.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 122
- Makes
- 3
- Views
- 802
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Mod replaces the lower part of the reverse bowden to a 6mm OD x 4mm ID to reduce the drag within the filament path a lot.
The internal geometry is designed to prevent any binding within the transition from ID 4mm to ID 3mm of the upper PTFE part.
No supports needed.
BOM for Standard 3030 Spool Holder
1x 3030_M6_PC6_6mm_PTFE_left
or / both for IDEX
1x 3030_M6_PC6_6mm_PTFE_right
2x / 4x IDEX PTFE_Lower_Mount_6mm
PC6_to_PC4_mount (one version without Text / T0 / T1)
2x / 4x IDEX PC6-M10 Fitting
1m / 2m IDEX PTFE Tube 6x4mm (OD/ID)
BOM for my 2,5kg/ 100mm wide Spoolholder (2020)
https://www.printables.com/model/1075431-ratrig-v-core-4-spoolholder-25kg-100mm-wide-spools
1x 2020_M5_PC6_6mm_PTFE_left
or / both for IDEX
1x 2020_M5_PC6_6mm_PTFE_right
2x / 4x IDEX PTFE_Lower_Mount_6mm
PC6_to_PC4_mount (one version without Text / T0/ T1)
2x / 4x IDEX PC6-M10 Fitting
1m / 2m IDEX PTFE Tube 6x4mm (OD/ID)