1 / 5

RatRig V-Core 4 6mm PTFE Mod Reverse Bowden

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

6mm PTFE Mod for the lower part of the reverse bowden. Reduces drag in the filament path.

Aktualizacja u źródła: 15 sty 2025

Informacje o modelu

This Mod replaces the lower part of the reverse bowden to a 6mm OD x 4mm ID to reduce the drag within the filament path a lot.

The internal geometry is designed to prevent any binding within the transition from ID 4mm to ID 3mm of the upper PTFE part.

No supports needed.

BOM for Standard 3030 Spool Holder

1x 3030_M6_PC6_6mm_PTFE_left

or / both for IDEX

1x 3030_M6_PC6_6mm_PTFE_right

2x / 4x IDEX PTFE_Lower_Mount_6mm

PC6_to_PC4_mount (one version without Text / T0 / T1)

2x / 4x IDEX PC6-M10 Fitting

1m / 2m IDEX PTFE Tube 6x4mm (OD/ID)

BOM for my 2,5kg/ 100mm wide Spoolholder (2020)

https://www.printables.com/model/1075431-ratrig-v-core-4-spoolholder-25kg-100mm-wide-spools

1x 2020_M5_PC6_6mm_PTFE_left

or / both for IDEX

1x 2020_M5_PC6_6mm_PTFE_right

2x / 4x IDEX PTFE_Lower_Mount_6mm

PC6_to_PC4_mount (one version without Text / T0/ T1)

2x / 4x IDEX PC6-M10 Fitting

1m / 2m IDEX PTFE Tube 6x4mm (OD/ID)