1 / 10
2025 Party Glasses - New Years
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fun party glasses to celebrate the new year - 2025
- Rating
- 4.667 / 5
- Likes
- 11
- Downloads
- 207
- Makes
- 3
- Views
- 787
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fun glasses to help celebrate the arrival of the new year - 2025.
Printing:
- Shown in Sparta3D.ca Galaxy PLA
- Use brim for the Left and Right glasses arms if required
- Supports not required.
- Print at 0.2mm layer height
Assembly:
- Remove glasses arms brims if they were used and clean the edges if required.
- Bend the glasses frame at the nose bridge area just a little bit using hot water or heat gun.
- Remove the built in support piece from the glasses arms at the hinge area, be cautious here as there's not a lot of material. (see GIF in gallery)
- Test the hole size and use 1.75mm filament as a hinge, the holes might need to be enlarged depending on your printer and settings.
- Slide the glasses arms onto the frame and insert the filament through the arm and frame hinge.
- Trim the end of the filament, and if possible use a little heat to squish the filament and make a "mushroom" on the top and bottom so the filament hinge doesn't fall out
- Happy New Year!