1 / 2
Triumph Tiger 900 - Tank slider/Protector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tank corner protector for a Triumph Tiger 900, to hide damage or protect low speed drops
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 81
- Makes
- 0
- Views
- 588
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
OK - not really a tank slider for them low side track days, but more something to hide them skid marks when stalling on the switch backs in Welsh Alps or a little bit of protection when you forget to put the kick stand down fully. Tested on the 23/24 models, however should work on earlier ones.
- The slider can be attached with 3M VHB 1mm double-sided adhesive tape, by applying strips inside slider first on the top and bottom halves.
- Perform a test fit, making sure you correct side and location, the peel off the other side of the double sided tape.
- Before attaching, heat the slider up with a heat gun, this makes printed parts more plyable to shape to the tank profiles, and makes the VHB glue more affective.