1,080 models
A quick and easy chip clip. Has a tab for easy release and two lock positions for those extra chunky chip packets. Update: Added a slightly shorter, wider version. Update: Added versions designed for easy opening and a super-short version.
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Check LOG bellow for changed parts! _ INTRODUCTION This controller is a 3-axis + 15-button HID, designed with Euro Truck Simulator 2 in mind. It also works with other games. The steering wheel has 900 degrees of rotation and force…
This is a little threaded GPU Support i made in Fusion360. Adjustable from 56mm to 96mm. You can customize the height / thread length in the provided Fusion360 file.
I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 5 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…
Vague for the next week im leaving for the outback in a few hrs. Requires a 65mm length .3mm thick brass strip 12mm wide and a way to drill a 3mm hole in it. Build Guide WIP sorry, but at least its here this time! Im back the 25th at the…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
Slides in between the OEM mounting plate (required) and the display. Print with the front facing down so you can get a nice finish. (Will require support)
Version 1.2 changes Reworked the selector ring to be less likely to catch on the ratchet springs when changing modes. Added modeled knurling to the thumb screws and nuts. Reworked link part to multiple parts to better optimize for layer…
hello, this is my personal interpretation of a 900% remodeled dummy 13. taking inspiration from @Depep1 with his 600% version I asked myself: but how much bigger can I make it? so I got to work to make this remix: this version has in the…
;tldr - Quick Start: Select the model (! Use Prusa Slicer 2.6.0 or newer ! ) - “Direct Drive” for the MK4 or “Bowden” for the Mini+., Additionally, you can select a layer height to test. Simply load the file in Prusa Slicer and slice the…
Replacement part that I designed to save my headphones. Other replacement parts were either out of stock or too expensive so I made my own. Assembly Fold the ear cup in and remove the 2 black screws near the swivel joint. Separate the…
Mostly accurate Airbus A350-900 model
Remix of this mesh on thingiverse, which starts out with the basic shape, which I've smoothed out to a high poly mesh, then added approximate cut-out details from reference photos. It's symmetrical, so one can print half of it twice and…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
Did the remix for both the regular and small size. I really like the functionality but the text kind of annoyed me a little as i am not a huge fan of text on my prints that isnt necessary. Other than that Martin_au did a great job…
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
RAK19007 WisBlock Base Board mount with 4mm mounting holes that fits an electronics base board with a 5mm grid spacing.
Celebrate the spirit of the open road with this 3D printable STL model of the Kenworth W900 Truck. This iconic semi-truck model is perfect for truck enthusiasts and model builders looking to display a classic piece of American trucking…
I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 2 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…
1:200 Desk Model of the Airbus 350-900. The .3MF file contains the parts for the print. Wingtips were printed with supports
This is a 300x600 (RIFF 600) or 300x900 (RIFF 900) size DIY printer that can be built without spending a fortune. I encourage the use of second hand parts and will not provide any complete BOM listing specific new components. Some key…
Bearing Press Tools for 6900, 6902, 6802 Bearings The files marked "Press In" are a remix of bikenerd tools. I just changed the numbering to be on the side so it could be bigger text. The files marked "Press Out" are for pushing the pivot…
A proper filter box for using Roomba 800/900 series HEPA filter in your Voron 2.4 Exhaust. Unlike the other HEPA box posted here, this one fits the original exhaust housing and should use less material. Print with Filter insert side on…
I contacted the Maker of the Model STP9000 and asked to edit it for SC2020. Thanks for your permission chilluniverse@chilluniverse ! Remix for Holder Sepura SC2020 with Speaker. Happy printing! #STP9000 #STP9038 #SC2020
required equipment power switch of your choice 10000mAh battery gps module ipex to sma connector/wire "soldering/heat shrink m2.5 x 4mm bolts for mounting switch otherwise its the same as the original.
This is a redesign of the awesome truck from ProfessorBoots to look like a Kenworth W900A. I grew up with the movie Smokey and the Bandit and therefore I wanted to have a Kenworth in addition to the Peterbilt. To have the same color…
For years now I've had a ratty nail going through the magnet to hold my Hue motion sensors in the corner. It not only looks janky, it doesn't stay put very well. Then, I got a 3D printer. i checked out a few models online, but I didn't…
My modest remix of Maff's excellent model. Changelog to the original design: Optimized for 100% metric fasteners (ALL M5 unless noted otherwise) Tweaks to the bolt orientations/approach for both mirror holders Removed all of the lettering…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 3 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…
I remixed the excellent Rugged Box to hold my mobile, temporary installation Meshtastic box. It currently holds 2x 18650 batteries in parallel and has space for 4 magnets so you can stick it to a steel surface. The plate is modeled for a…
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…
v2 Update : A little bit slimmer profile, and some model flaw fixes. Designed as a small profile mount for the Wisblock RAK19007 board from RAKWireless. This will allow it to be screwed to a basic enclosure grid mount found in a lot of…
Reprofiled for better airflow, better upper strength, and less TPU usage
I tried using RetroGameRevival's file PS2_2.5inch_HDD_Caddy_GameStar_Full for my PS2 system (SCPH-39001) and it was 2mm too wide on the right and the HDD needed shifted left 1mm in order for everything to line up. Rather than trying to…
I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 6 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…
The Bilskirnir, also known as an Asgard mothership or Thor's chariot was Supreme Commander Thor's flagship before the O'Neill class was conceived. I've modelled it from reference photos, schematics and all possible material I could find,…
Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle. The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of…
RWE (Rugged WisBlock Enclosure) is a remix of the open-source ruggedized T-Beam enclosure, now for the RAK19007 WisBlock base board with RAK4631 (LoRa) and RAK12500/1910 (GNSS/GPS) modules. This induces a couple important build and…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Step into the future with the Pointer9000! To assemble this marvel of wireless precision and retro design you need bambulab's Wireless Mouse Components Kit . Help me create more FREE models! If you like the stuff I create, consider…
This is a printable version of the standard AP900/ Air Venturi Alpha forend/ fore grip. The M Lok is functional and the location for the standard magnet to secure the folded stock is included. Additional reinforcement is included that…
This is a printable version of the standard cheek riser to fit the Snowpeak AP900/ Air Venturi Alpha PCP. The factory hardware is used, so just print in your favourite filament and change up the appearance of your PCP! The model is…
I recently bought a second hand Canon Selphy CP900 Photo printer, but it came without a paper cassette. Looking on Ebay revealed that if I could find one it would cost more than i paid for the printer! I couldn't find one on Thingiverse ,…
The original Chip Clip 9000 was great, and seen as revolutionary by so many people. But what is more revolutionary, than that? I'll tell you what! The Chip Clip 9000 Pro Max, that's what! It's the same exact Chip Clip 9000, but slightly…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
Made a mount specific to the M900 version of the Lenovo Thinkcentre's. For some reason, this version of the mini pc had its feet rotated 90° so while existing models would have physically fit the chassis, the feet would have been in the…
These buttons, or more accurately button adapters or extenders, can easily fall off during transportation or if dropped (so I've discovered). Rather than buy a new mouse or mouse adapters I grabbed some calipers and got to work in…
Holder for Wera Kraftform Plus – Series 900 Big Pack for the Multiboard The holder for Wera Kraftform screwdrivers (900 series) is designed for use with the Multiconnect System by @DavidD for Multiboard. Both holders are intended for the…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
This was initially going to be a remix, but the mesh I was trying to work from was just too problematic so I only ended up using it for proportions and remade everything from reference photos. It's a bit problematic to print so I've split…
Ryobi 900 Band Saw Mitre gauge. Never had one, so decided to make one. UPDATED 6/10/2017: Increased size of mitre base by 50%. Increased handle size by 50%. Corrected hole sizes for M3 bolts and nuts. I borrowed the angle marks from…
UPDATE: Added a top antenna version. Commercial Use and Attribution Notice: Alley Chat DroNode © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling…
Mounting plate for a RAK Wireless 19007 base board, using M3 screws
Summary This is a case for RAKwireless RAK19007 and RAK5005 base boards with an N-type antenna. My goal was to create a thinner case to accommodate an N-type antenna connector. The current design works but could be improved, for example a…
Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle. The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of…
Wanted to mount my rear view camara for my wolf box dashcam on the outside of my car to replace my rear view mirror as it gives me a far better field of view but didn't want to leave it completely exposed, found a few designs but they…
Used the original model from Thingiverse (Huge thanks to rafloel this is a great model) and replaced it with the mirrored thread from Chrisfu Quick connect exhaust hose, because this thread fits well with the original hose from the AC (I…
This mounting plate allows you to mount a RAK19007 board to an enclosure with the commonly found mesh plate as seen here: https://a.co/d/iQgPNPy . Use M3 or #6 size screws for mounting to the enclosure. For the board itself, the screws…
This is a simple case for the rakwireless RAK19003 Mini Base Board to, in combination with the RAK4631 or RAK113100 Core Modules, create a very simple USB connected Meshtastic node. My goal here was to create the most minimalist case I…
Case to perfectly store the Philips Norelco Multigroom Series 9000-21 - MG9510 and all accessories. The Cover must be printed with the top (Philips logo) faced down, I used supports only on the logo. Rods can be printed horizontally, but…
Vertical stand for Lenovo ThinkCentre M900 mini-PC series.
This is a solid platform for mounting your Walksnail hd Avatar VTX kit to Sonicmodel AR wing 900. Fits perfectly nose for session camera. Just use a couple of drops of UHU Por to glue it to EPP. I strongly suggest to print it from at…
I purchased a Dewalt Wet/Dry Vacuum (DXV10S) and was disappointed to find that its hose did not fit to any of my Dewalt hand or stationary power tools including my electric sander (DWE6421) and electric planer (DCP580B) which require a…
This is meant to be a stationary node, not a portable handheld device. It features: compartment for up to 4x 18650 lithium-ion cells (long enough to accommodate protected cells) M2.5 mount points for RAK19007 or RAK19003 base board M2…
Mikrofonhalterungen um das brechen der Kabel wie im Bild wenn das Mikrofon ans Kabel geklemmt wird zu verhindern. Kann einfach mit den normalen Schrauben fixiert werden, wie im Bild zu sehen. Standard ist mit einem 40,5mm Lochabstand, die…
Box for trimmer 9000 series, with 15 additional sets,
Build a prop replica of the iconic HAL 9000 interface panel from the movie 2001: A Space Odyssey. Powered by the Adafruit RP2040 PropMaker Feather and CircuitPython, this project uses our enormous red arcade button to trigger audio…
I designed some caps to cover the holes on the sides of the frame of my Kawasaki Z900 RS. The logo itself is not my design. The caps feature three places to easily remove them, even without tools. They might fit other motorcycles as well,…
I couldn't find any lids for larger Nutella jars online, so I made this one out of OuterSilent's one I found on Thingiverse by adjusting the size and threads. I wanted a tight fit so I can store kimchi and other liquids in the 680 and…
Brabus G900 Rocket Edition
Wall Mount for the Sonicare DiamondClean 9000 charging station. It's Designed for the Plastic ring, but it also works with the Glass. Printed with the Bambu Lab X1 Carbon in 0.16mm with 0.4 Nozzle. Using Extrudr Greentec Pro Black PLA.…
Adapter mount to install RAK Wireless 19003 mini baseboard to enclosure with 5mm grid hole pattern. Also includes adapter for 2000mah flat pack battery and Waveshare solar controller (D version). The onboard solar charging on the RAK…
This is a water resistant enclosure for RAK19007 Wisblock. Its powered by a user removable 18650 battery. This case aims on modularity, the core module where the radio is mounted, is removable and can be mounted on different appliances.…
A case for storing a 9003/H4 bulb Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.1 Infill: Doesn't Matter Filament: Spool3D PLA Category: Automotive
Clamp to repair headphones that have split between the panel on the headband attached to the cup, and the slider. When you pull these headphones apart to put them on your head, especially if the sliders are slid down very much, it puts a…
Saab 900 Saab trunk emblem
Use 1.75mm filament as pins. thoroughly clean the edges of the opening. use plastic glue to glue the parts together I look forward to your prints cz: Jako čepy použijte 1,75 mm filament. Důkladně očistěte okraje otvoru. Pro slepení dílů…
This is a replacement filter cap for a IRobot Roomba 900 series. There's a version with and without the seal around the cap, if you want to glue some rubber seal on the cap. Update 2022-04-17 Added Seal files to print in TPU / TPE…
IMPORTANT: The panels are difficult to source so I don't recommend using this model anymore unless you can find the exact panel. I have a new version in the works with a more reliable supplier. My goal was to create a durable solar…
Remix of Cat Ears for Sony WH-1000XM3 by vidister on Thingiverse They clip on the size adjustment guides, and are flexible enough to be deattached easily when printed in PETG. Since the clip didn't match my headphones, I did a few tweaks…
Modifications to fit a physically largery battery
Use these magnets to fit it in the lid to attach to an iPhone or Android phone with a magnetic ring attached.
A minimalistic, zero protruding elements, pocketable, lightweight case for the Meshtastic RAK Wireless 19007. The objective for this case: it should be pocketable and not have any protruding antennas, second it should be compact and…
If you need dust protection (about P1) or an exhale filter (as per authority requirement) just print these out and attach any membrane material you have at hand, fasten with a wire and you are ready to go. Made for a friend of mine who…
This is my rendition of the HAL 9000 from 2001 A space odyssey. It has the facility to turn the LED on and off WITHOUT having to lift the unit off the wall and without changing the look of the unit in any way whatsoever. The…
This is a weatherproof (or waterproof depending on the version) case for a RAK19003 based Meshtatic node. Since the RAK19003 includes a Li-ion charging circuit and solar panel input port, the cases have room for a 2000mAh Li-ion battery…
Closed single filament buffer, using acrylic panels. Can take ~900mm. Ive included the step file so feel free remix. No supports needed when printing (Recommend PETG) Please upload your makes, would love to see them ** Based of another…
I have a Phillips Norelco Multigroom 9000 that I purchased from Costco. Unfortunately it didn't come with a nice way of storing the guards for the trimmer and I found they were always scattered all over the place. I built this to store…
This is a remix for mounting EK-Quantum Kinetic TBE D5 pump/res combo units. It has been shortened to allow the fittings to exit the rear along with relocated mounting holes for the standard bracket. I also thickened the vertical mounting…
Español Correa de repuesto para reloj Casio G-Shock G7900-A. Debido a que he procurado darle la forma de la correa original, necesitarás soporte para poder imprimirla correctamente, pero no supone ningún problema ya que serán mínimos. La…
Update 18.2.24: Step-File zugefügt Staubsauger-Adapter für Einhell Flachdübelfräse TC-BJ 900. Der Ausgang hat einen Durchmesser von 35mm. Die Freecad-Datei ist angefügt, der Ausgang kann also auf die jeweiligen Bedürfnisse angepaßt werden.
Ich wollte meine Blinker Vorne an meiner Z900 SE umbauen und habe im Internet Adapter dazu bestellt. Diese haben mir erstens gar nicht gefallen bezüglich ihrer Oberfläche, ausserdem hatte ich die Falschen bestellt die gar nicht passten.…
![GPU Holder Max Pro 9000 [Parametric]](https://media.printables.com/media/prints/602760/images/6697680_da94602d-9c89-4674-8bb1-0f7bd3032deb_f41efe84-f920-447b-9afa-6015c269244b/20240508_125659.jpg)
