1 / 2
Wall-mount Tinkertoy Sphere (Montessori-style)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a half-dome full of slots for Tinkertoy rods with mounting holes to attach to a wall
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 17
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a new way to play with a Tinkertoy Construction Set. It's a half-dome full of slots to accommodate the wooden rods, that you can screw onto a wall.
I needed a quick wall-mount mobile arm, so naturally I got to work remixing my earlier Tinkertoy Sphere Game.
If you don't have any Tinkertoy rods, you can get a full set of replacement models here: https://www.printables.com/model/241063-tinkertoy-construction-set-replacement-parts
Design features
- The overall shape is 36mm in diameter (slightly smaller than the original version, to hide the screw holes inside the Tinkertoy slots).
- There are 8 slots at 0 degrees (mounting plane), 6 slots at 45 degrees, and 1 slot at 90 degrees (perpendicular to the mounting plane).
- There are mounting holes through two of the 45 degree slots for a #6 or #8 countersunk wood screw (North American standard).
- The rod slots are chamfered for easy insertion.
Printing instructions
- Choose an appropriate material for your application.
- The fit should be good, but if it's too loose or too tight, try scaling the model slightly (< 1%) equally in all axes.
Installation instructions
- Use two #6 or #8 countersunk wood screws (North American standard) to securely attach it to your wall.
- The lower screw has some horizontal play for fine-tuning the angle.
Safety notes
- Make sure that the way you use this won't cause injury or damage if a rod falls out. Consider glue for a more secure attachment.
- Please supervise your children at all times.
Notes
- I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification (different base or slot sizes, angles, number of slots, etc.), send me a message and I'll see what I can do.