Prusa MINI+ X-axis spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spacer to align the Prusa MINI+ X-axis with the markings on the print sheets.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Once installed, this spacer will offset the X-axis by 2 mm. Creating this offset results in a better alignment with the markings on the print sheets. In the case of the Y-axis, it is possible to improve the alignment by moving the XZ-axis assembly slightly towards the front of the printer. It might also be necessary to adjust the positions of the 2 bearings that define how far the Y-carriage can move in each direction, not only to help with the alignment but also to ensure that the nozzle does not collide with the 2 screws at the back of the heatbed.