1 / 1
LDO Nitehawk Umbilical Exhaust Plate for Voron 2.4 - 2 Toolheads — image 1

LDO Nitehawk Umbilical Exhaust Plate for Voron 2.4 - 2 Toolheads

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows LDO Nitehawk umbilicals to pass into the print chamber.

Rating
5 / 5
Likes
11
Downloads
88
Makes
0
Views
1,324
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a replacement exhaust plate for the Voron 2.4 intended to allow umbilicals to pass into the print chamber. Print from ABS/ASA. Requires modification to rear enclosure panel, three M3 heat set fittings, and three M3x8 SHCS.

 

Included parts:

exhaust-plate-base.stl

-This is the actual exhaust plate replacement. Install 3x M3 heat set fittings.

 

exhaust-plate-lock.stl

-This is the part that will lock the PG7 blocks in plate. Attaches to the base with 3x M3x8 SHCS.

 

pg7-block.stl

-This part has interrupted threads to allow you to non-destructively fit your umbilical cable in before tightening down the PG7 cable glands. They slip into the exhaust plate base on rails and are retained with the exhaust plate lock.