1 / 4
Parkside mitre saw stop block
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits on support bar, both sides
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 54
- Makes
- 0
- Views
- 595
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Original design leaves a lot to desire, so I designed a simple block which you can put on the support rail, slide it along and tighten with a thumbscrews in place. It will widen the range up to about 35cm. Obviously, you can use it on both sides of the saw.
- Extra hardware required is 2x 5mm heatinsert and 2x M5x16 HH screw
- I'd recommend to print from PETG here, so it can withstand some rough handling
- There are some tiny supports
- PrusaSlicer file, it can have issues in clones/forks
