Lenovo Thinkcentre Tiny double vertical stand with centre slot for small switch/other
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adaptation of a great rack, with space for 2 usff lenovo thinkcentres and a small unmanaged switch or similar in between
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 81
- Makes
- 0
- Views
- 885
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
A dual slot rack for two Lenovo tiny pcs with a slot in between to comfortably hold a small unmanaged switch.
(I have a couple of these by the router running adguard so nice to have them both connected directly)
Holds two usff lenovo thinkcentre (thinkcenter) tiny pcs and a small unmanaged switch in the middle. Not especially snug, but keeps them in place well enough for my uses so far.
Made a 23mm and a 25mm for my two different switches I had spare to hand.
Also included separate files with the two sides and central piece , so you can import them in to tinkercad.com and inch the side parts closer together or apart, line them up and print a custom width if 23/25mm isn't what you need. To be clear, for these you need to download/import all 3 bits, and line them up with the central gap the right width, but I've split them up for you which is the bit that took me time. (I'm very much a novice, so apologies if that's daft!)
The 23/25mm files just print as you find hopefully.
Hopefully that works/is simple enough to be useful!