116 models
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
I have a few Lenovo Thinkcentre Tiny pc's. One came with the stand. I replicated the oem's design so I can have more stands for my other pc's. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…
This is a stand for the Lenovo ThinkCentre M9xxq Tiny series for upright use. It eliminates wobbling and gives it a firm and save stand. It might be useful for the other series (e.g. M7xxq and M8xxq) as well. It's designed for a device…
edit 02.11.2024: added version with screw holes on the top. For under-desk mounting. edit 24.01.2024: Slots for the rubber feet set further towards the center. Curves instead of corners on the narrow bridges. This wall bracket is mounted…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
This mount was designed for M720q/M920q mini PCs, but should work for any Thinkcentre Tiny with the same form factor. The mount has a seat for the Thinkcentre's rubber feet that keep the computer in place. I have a true 1U rear support…
Lenovo Thinkcentre M710t has M.2 NVME port which is on edge of motherboard so if you want to add SSD to it, you have to buy mounting kit which is piece of plastics which snaps to case and provides single screwhole for your SSD. I didn't…
The rack mount can be printed standing on its front side without supports. There are holes on the rear side where threaded M3 inserts can be installed, enabling mounting of the retention clips with M3 screws. For more details, please…
A small Stand for the Lenovo ThinkCentre Tiny Series. Nothing more nothing less. _(ツ)_/ Print Settings Printer: Prusa Mini+ Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.15 Infill: 15% Filament: Prusament PLA Gentlemans…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled in the back too for more strength/support. The screw and hex connector's is adapted from…
Made a mount specific to the M900 version of the Lenovo Thinkcentre's. For some reason, this version of the mini pc had its feet rotated 90° so while existing models would have physically fit the chassis, the feet would have been in the…
This is a 10" Rack mount for a Lenovo Thinkcentre M625q Tiny with the measurements 180x183x35mm. Should fit other PCs from Lenove as well. I used print on supports. I set the brush type to trianlge an painted on the overhangs as seen in…
Inspired by great video from the guy with Swiss accent I've bought Lenovo ThinkCenter in USFF case to be my home server. I've already have my “internet devices” mounted on a wall in my closed so I quickly designed this holder to mount the…
Hi, just got some used lenovo m920q (should work for a lot of tinys with the same form factor). It has a offset ~ 32mm cause my task has pipes and metal with 30mm under the desk. So cables and connectors are not blocked. this is version…
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
Created this for the P360 Lenovo Thinkcentre desktop. Needed a mount for an addition M.2 SSD but didnt have a local seller for the Lenovo official kit. The model is designed for printing by SLA, though it can be printed via FDM. Just add…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled with more screws and hex nuts. + 2x keystone Print face down. Walls - 4 infill - 30 ore…
English: Lenovo ThinkCentre M710q Expansion Kit" is a multifunctional expansion solution specifically designed for Lenovo ThinkCentre M710q Tiny-PCs. This kit includes a compact housing for the Tiny-PC and a PCI-E expansion card that…
I needed a place to hang my Lenovo Thinkcentre M53 mini when using it with my old tv screen since i dont have a table nearby, so I made this one. It is printed with the open side facing the build plate w/o supports. It might fit other…
This is a low profile bracket/baffle for a Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC (for example the BCM95719A1904G) to be used in a Lenovo ThinkCentre M920q tiny PC. Remove the card's original bracket and use a small-head screw from the…
M920q cover for a 2.5gbe A+E keyed RTL8125B adapter. Probably also fits other Lenovo ThinkCentre variants
10 Inch Rack mount for Lenovo ThinkCentre Mxxx PCs, in 4 parts for printers with small print beds.
Needs a 30x30mm fan: https://www.aliexpress.com/item/32406690267.html?spm=a2g0o.store_pc_home.promoteWysiwyg_503227844.32406690267 The two clients i have lowered with around 15-20c
Vertical stand for Lenovo ThinkCentre M900 mini-PC series.
Created a simple vertical stand for my Lenovo ThinkCentre. Measurements of my ThinkCentre 179 x 183 x 34,5 mm Measurements of the vertical stand: 100 x 61 x 29 mm Measurements of the width of the middle: 35mm
I needed a Holder for a Lenovo Tiny PC. The original provided by Lenovo were to expensive so I took it into my own hands and designed my own. I'm open for suggestions and critic.
Modified version of Thinkcentre Tiny 1U Rack by Rehpa. I've added slots for the feed, so that they dosen't need to be removed. Also I added a cover in case one slot is left empty.
I modified it for a Lenovo M720q Tiny so that its rubber feet could fit through. And I increased its height to make it more stable when there are a lot of cables connected. Standard PLA printing is sufficient.
Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330 Prueba de temperatura: Empieza con un valor bajo, como 220°C, y haz pruebas para encontrar el punto óptimo para tu equipo. La temperatura ideal del filamento PETG suele estar entre…
Just some experiments for mounting the m93p vertically rather than laying it flat. v1.0: The version pictured, and it has some issues. Missing slots for rubber feet. You could remove the rubber feet but that feels like a bad outcome. YMMV…
Lenovo Thinkcentre tiny series (m720q, m920q, ...) PCIe baffle to attach a 40mm fan to a connected Nvidia Tesla P4 on the internal PCIe riser. To power the fan i used this temperature based speed controller (…
Rear baffle plate for a 4-port PCI-E NIC, specifically the fenvi 2.5Gbps Intel I226 RJ45 card (https://www.aliexpress.com/item/1005007669305799.html). Please make sure to print in PETG or another heat-resistant polymer as these NIC cards…
Picked up a nice Lenovo ThinkCentre M900 “Tiny” computer at a flea market. (See photos) I wanted to set it vertically on my workbench (it's controlling a Laser Engraving machine) but needed a stable stand for it. Seems like Lenovo no…
Works fine and fits absolute perfect with my M720Q but other M700 and M900 fits too. They have the same size. Dimensions (H x W x D) (17.9 cm x 3.65 cm x 18.29 cm) (M720Q) Dimensions (H x W x D) 17.95 cm x 3.70 cm x 18.34 cm (Wall Mount)…
Print with PLA or PETG. Infill 25% with 3 Outside Layers.
The computer is mounted upside down to take advantage of the rubber feet. If you want it in a normal orientation, put some adhesive rubber feet or a piece of rubber on the top side. You can also edit the freecad file and adjust the…
I've been working with the Lenovo ThinkCentre Tiny M910Q/M910x in my projects for some time now. These devices are incredibly compact, affordable, and surprisingly powerful. This time, I decided to build a NAS server using one. By…
This is a remix of the under desk mount with the mount holes at 100mm spacing so it can screw to the back of a monitor.
This is a mount designed for the Lenovo ThinkCentre (M715q). It can be used as a wall mount or placed on a table. The mount elevates the ThinkCentre, allowing space underneath, for example, to store the power cable. The device is secured…
Es handelt sich um eine Halterung für ein Lenovo ThinkCentre M700 Tiny. Diese ist so konstruiert dass das ThinkCentre von der Seite reingeschoben werden kann. Zur Befestigung befinden sich pro Halter zwei 4,5mm Löcher mit 2,2mm Fase damit…
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
Print with outward facing/flat side down. Includes three holes for M3 threaded inserts to secure the bracket to the NIC and the case of the M720q. But it should also hold reasonably well without threaded inserts by securing the bracket…
This model was inspired by this work. Except I wanted it to use the side rails of the rackfinity system as well as have it printable on a Prusa Mini. So I designed my own version that fulfills those requirements. The back piece contains…
Für das Lenovo ThinkCentre m75q gen2 angepasst. Zudem mehr auf eine Wabenstruktur gesetzt um. Support wird nur für die hintere Fixierung des p340 benötigt. Für die Lenovo ThinkStation p340 angepasst. Zudem mehr auf eine Wabenstruktur…
It's a very tight fit, and the SAS card is slightly unaligned but it fits, and it works \_(ツ)_/
My Lenovo 'ThinkVision' monitor had a mount/bracket at the back for their ThinkCentre mini PC's but I didnt have the mount for the actual PC so designed this. May not be useful to anyone but as I designed it, I may aswell upload incase…
After performing the https://github.com/badger707/m920q-dual-NVME mod on my M920Q, I needed a piece of plastic to retain the SSD. So I made this. Printing notes: These parts are very small, it's recommended to print both of them at the…
This is a bracket for table or wall mounting a ThinkCentre mini-computer. It was designed with the M900 and M92P in mind, but it'll fit any computer that is 35mm thick. Two or more brackets will be required to adequately hold the…
SSD bracket for Lenovo Mini-PC ThinkCentre M92p
Note: Please print the STL in the "Long Plug+Boot" folder to avoid issues with RJ45 Plugs being too long. The version you see in the pictures has a flaw i only noticed after taking said pictures: Ethernet cables with a maximum Plug + Boot…
I modified it for a Lenovo M720q Tiny so that its rubber feet could fit through and for a 100mm VESA mount. I also increased its height to make it more stable when lots of cables are connected. And you can clip it to a Ikea Skadis peg…
Rear panel for the Mellanox Connectx-3 Dual QSFP+ infiniband network card (Model Number CX354A). For the thinkcentre tiny family of micro pcs. Has been tested on an m720q, m920q and Thinkstation P40.
A dual slot rack for two Lenovo tiny pcs with a slot in between to comfortably hold a small unmanaged switch. (I have a couple of these by the router running adguard so nice to have them both connected directly) Holds two usff lenovo…
Lenovo ThinkCentre front panel port cover and button / Lenovo ThinkCentre panel przedni osłona portów i przycisk
This will click into a Lenovo Neo 50q tiny. It may work for other models, if so let me know and I will add them to the description. Your hard disk should click into and fit snuggly in the cradle of the caddy. Slip the edge slots over the…
The M2 disc spacer was missing on a bought Lenovo ThinkCenter machine so I created one. Best printed on side. Category: Computer
Mount to put your ThinkCentre Power Supply under the table
This design was used to showcase Toroban - an indie puzzle game I worked on - as a portable 4P setup to bring to various game conventions. I have since retired the design and upgraded to an aluminum extrusion 8P setup with various 3D…
Adjustments for more efficient printing
Direct fit for the Lenovo ThinkCentre M81. Mounts a 3.5" HDD. There is room to mount a 2.5" SSD to the bottom of the HDD. Look at my profile for the HDD underside mount adapter. Category: Computer
Half-width (9.5") rack mount for Lenovo ThinkCentre Tiny. Mount the machine using two M3 bolts.
This is a remix of the “Lenovo ThinkCentre Tiny M920q 19-inch rack mount” by Mixmeister on Printables (model #1417569). The original design holds two Tiny systems side‑by‑side in 1U; this remix replaces the left slot with a front-panel…
The Thinkcentre Tiny mount is a left-side only with keystone. The right side with the @mauker style bolt connection is also modified to capture hex nuts and integrate the bolt-together tab with the PC support arm.
This custom 3D-printed bracket replaces the stock 2.5" SSD tray in Lenovo ThinkCentre M920 systems. It allows mounting of an mSATA SSD via a small adapter board, creating more room inside the case—ideal when paired with a PCIe NVMe riser…
Whipped this up real quick to mount a Lenovo ThinkCentre Neo 50q on the back of a monitor. Model is heavily based on ZeroDotCMD 's model for a Dell thin client that I remixed earlier this year Note: I removed the rubber feet on the Lenovo…
Features * 180mm Bed Compatible: Designed to print diagonally on smaller printers (like the Prusa Mini). * Secure: Features a locking screw mechanism to prevent the PC from sliding out when cables are pulled. * Airflow: Configurable gap…
This is a stand for all Lenovo Thincentre Tiny. For it to be stable i recommend to remove the rubber feet from the computer and put on the stand feet. Happy printing! Category: Office
This is a blank for use with the " Lenovo Thinkcentre Tiny M720Q/M715Q/M920Q 19-inch Rack Mount" from @Mixmeister (a remix of a model from @timmi) - total credit to the creators. This is a removable blank that fits into the space where a…
This is a simple PLA plate that can be used as a support for two antennas for internal WiFi (and Bluetooth) cards. The antenna bolts can be firmly screwed to the plate and the plate itself can be screwed to the case using the standard…
A simple snap in 10" 1U rack mount for the Lenovo ThinkCentre M720 Tiny. Printing I have used dirt-cheap black PETG which is holding up fine. Try to avoid PLA as it probably won't hold up very well to the higher temperatures a…
Description This is a modified rackmount case for the Lenovo ThinkCentre M720q Tiny, adapted to fit the 10-inch Lab Rax rack system. The original model did not properly match the Lab Rax rack dimensions. I redesigned the left and right…
Simple mount for ThinkCentre M770q
I needed a mounting plate for my AOC STGN-I2S network card to install it in my Lenovo M910. Since I couldn't find one that fit my network card, I decided to design one myself. It worked well enough for me to mount the card neatly in the…
I remixed the original model to mount my ThinkCentre M920q to a Skadis pegboard. The fit is somewhat loose, if exposed to vibration or motion I'd recommend adding additional measures to keep the device in place.
Notes pour impression Fait avec une imprimante résine, car les pattes sont très fines. notes pour montage Le ressort n'est plus utile et aura tendance bloquer la position du bouton.
Einfache Halterung für einen Lenovo ThinkCentre für ein Schwerlastregal. Im Bild handelt es sich um ein Schwerlastregal von Juskys.
I am building a server from my Lenovo ThinkcentreM910s. Since I want to accommodate as much storage space as possible, I removed the DVD drive to accommodate another 3.5 inch HDD. For this, a total of 5 or 6 rivets have to be drilled out…
Blank PCIe bracket for Lenovo ThinkCentre M910x and ThinkStation P320 Tiny. You can use this to create your own brackets.
A backplate for using the single port RTL8125B network cards with the Lenovo ThinkCentre M720 Tiny. Tested and fits the Fenvi 2.5G RTL8125 PCI-E network card, but should fit most other models and brands as they seem to use the same…
A compact, modular homelab rack designed for stacking mini PCs such as Lenovo ThinkCentre systems. Inspired by a design by @RaidOwl_2908363 , this build is tool-free and requires no screws or additional hardware , making it easy to…
Wanted to get my home server away from a flat surface to improve air circulation. Not pretty but works well
This custom rear fan bracket replaces the PCIe blanking plate on Lenovo ThinkCentre M920/M720 systems. It mounts a 35 mm fan and a fan speed controller to direct airflow towards NVMe and SATA drives—ideal for builds using the PCIe NVMe…
Stackable rack for Lenovo ThinkCentre Tiny PCs. Every side piece is one tier tall, so you print exactly as many tiers as you have PCs, and you can add more later without reprinting anything. Inspired by the Dell Optiplex Micro Storage…
This disk drive cover (blocker plate) is specifically designed for Lenovo ThinkCentre desktops. It fits perfectly inside the recessed area where the disk drive would normally be, making it an excellent solution for those using the system…
This is a replacement cover designed to close the empty DVD drive bay of a Lenovo ThinkCentre M91 after removing the optical drive. The cover matches the original front ventilation pattern of the case, preserving airflow and visual…
Mellanox ConnectX-3 dual QSFP+ PCIe bracket for Lenovo ThinkCentre M910x and ThinkStation P320 Tiny. Use a bit of force to tap the screws.
I printed it in ABS wit 0.4mm layer height and it is stable for two years now.
Had to remix to fit the keystones I grabbed off amazon https://amzn.to/478hoLz
2 versions, for 4mm insert and without.
ThinkCentre M920X Samsung SSD Caddy, I needed more room after adding a 2.5gig LAN to this little unit so I gutted the old Samsung SSD that was in it and that made plenty of room Heres the M2 screws I used to secure the SSD…
What this is This is the case I designed for a living room console built around a ThinkCentre m920s (Mainly) SFF motherboard. Compatibility: m920t, m720s, m720t, p330, ideacentre 510 pro and t510a Possible compatibility: m910s, m910t,…
The ThinkCentre M900 Modem Stand ensures airflow and stability, compatible with the E31U2V1 modem for optimized performance and reliability.
Not a great design but good enough. It is meant for the bottom side of the case. (The bigger side that has feet) Dimensions are slightly off but it fits. Original foot clips in but I didn't think that would work with the limitations of 3D…
Really simple design. I think it took me like 2 minutes to make. This replaces the little plastic piece that goes over the external mini WIFI antenna connector for the M710q and M720q Tiny. Prints quickly and no supports are needed. It is…
