Decora Adapter Filler Plate for Phillips Hue Dimmer (2nd Generation) Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a filler plate for a Phillip Hue (2nd Generation) Decora adapter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This adapter allows you to fill an empty light switch slot if you're using the 2nd Generation Hue Dimmer decora adapter.
This provides an ideal solution from a UX standpoint as the original light switch is not visible to the user, so they won't hit the hardwire switches, but they are still easily accessible if needed by simply removing the Dimmer.
Print it flat, no supports, and examine the print Preview to determine which layer you'll need to stop on. Pause on that layer (in my case I edited the gcode file to add M25 ; right before LAYER 26 to pause at the end of layer 25).
Then when paused, you can insert a 15mm x 2mm neodynium magnets (it should be tight so that the print head doesn't pull the magnet out while finishing the print). Make sure the magnet orientation matches the top magnet on the adapter.
