1 / 11
Creality K1C Upgraded Rear Exhaust Fan (60mm to 120mm) — image 1
1 / 11

Creality K1C Upgraded Rear Exhaust Fan (60mm to 120mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The rear exhaust fan in the K1C is very loud and horrible pitch. This is a mod that allows to mount a full 120mm fan.

Rating
5 / 5
Likes
80
Downloads
277
Makes
3
Views
3,927
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE:
I do not own the K1C anymore! I uploaded the .step file for this!
Consider buying me a coffee if you feel like it!
Cheers everyone :)

The rear exhaust fan on the K1C is so loud and the pitch is quite horrible so I decided to see if I could find a better fan (same performance but less noise or better pitch). 
I had done quite a bit of research and the only fan size that did NOT decrease the static pressure from the stock fan is a 120mmx25mm.

-Disclaimer: 

  • 4-pin fans, whether 12V or 24V, won't work well with DC controlled speed, which the K1C uses. To control fan speed, use a 2-pin or 3-pin fan. If you use a 12V fan, be sure to use a buck converter or similar to lower the voltage. 

  • I listed some good alternative 120mm fans at the bottom of the page.

-Chosen Fan:

  • Model: NF-F12 industrial PPC-24V-3000 SP IP67 PWM

  • Benefits: No modifications needed besides DIY cables. Better static pressure, speed, dB(A), and airflow than the stock fan. Allows for a closed chamber, reducing noise even when printing PLA.

-Performance Data (I do not have a lab, take these with a grain of salt):

  • Room level noise: 37.5 dB(A)

  • Stock Fan:

    • CFM with carbon filter: 12.5 CFM

    • Lid On: 54.2 dB(A) (measured 1m away at 100% speed)

    • Lid Off: 58.8 dB(A) (measured 1m away at 100% speed)

  • Noctua NF-F12 3000RPM 24V Fan:

    • CFM with carbon filter: 13.6 CFM

    • Lid On: 51.1 dB(A) (measured 1m away at 100% speed)

    • Lid Off: 54.7 dB(A) (measured 1m away at 100% speed)

**Data is from v23 of the stl model.

-Installation Notes:

  • Fan Mount: Use M3x4x4.2 threaded inserts.

  • Adapter Mounting: Use the same screw type as the stock fan but slightly shorter. An 18mm screw is recommended for mounting into the back panel.

-Good alternatives fans:

  • 12V:

    • ARCTIC P12 (3 pin - should keep DC speed control)

    • NF-F12 industrialPPC-2000 (3 pin - should keep DC speed control)

  • 24V:

    • NF-F12 industrial PPC-24V-3000 SP IP67 PWM (4PIN – will lose speed control)


❤ Enjoy this model? Your support means the world to me! 
If you love what I do, remember to like and rate the model. 
If you wish to further help me to fuel my projects, consider buying me a coffee,
I just do these for fun, but they take some time!
Every cup counts and is immensely valued. ☕ Cheers! 

Tags